德国百能堡Pfannenberg授权经销商|机柜空调|过滤风扇|制冷机|加热器|温控器|机柜照明|声光报警系统|苏州邦驰机电设备有限公司

Pfannenberg εCOOL系列高能效产品 (DTI/DTS/DTT 6xxx)

【字体：大中小】

2014-05-10 17:24:24

已阅读 2594 次

Introducing the εCOOL cooling units (DTI/DTS/DTT 6xxx)

Everywhere you see the εCOOL logo it stands for a Pfannenberg product that distinguishes itself by:

energy-efficiency
environment care
easy-handling

Cut-out compatible with εCOOL A/A and A/W Heat Exchangers !

The standard of the future

With this product range Pfannenberg is responding to the users’ increasing demands and to the growing climate awareness. The aim in developing the εCOOL series is the largest possible cost efficiency with the best possible performance.

Optimum in energy-efficiency

The εCOOL series has made an enormous leap in development compared with other tried and tested DTI/DTS units, in particular in energy efficiency.

Especially developed components combined with intelligent electronics of the newest generation reduce the energy consumption by up to 43%.

In stand-by mode by a further 10%.

εCOOL DTI/DTS and DTT

The time-tested, high-quality industrial standard of the DTI/DTS completely covers the needs for side-mounting and door-mounting, as well as for the partially sunk-in mounting (DTI) of every cabinet size.

Additionally Pfannenberg‘s DTT series provides, thanks to its innovative, patented condensate management a safety standard for roof-mounted cooling units that has never been attained before.
The εCOOL series is a role model for a new generation of cooling units.

Cut-out compatibility with Air/Air and Air/Water Heat Exchangers

Components in the enclosure are often updated and the requirements to thermal management change. You may wish to switch from an air/air heat exchanger which was previously the optimal solution and refit with an active εCOOL cooling unit.
This change can be carried out easily and without problems, because the units have the same cut-out dimensions.
Thus, the process stability is also ensured after extensive modifications.